BLASER CLIP-ON MOUNTS FOR NIGHT HUNTING

THE PERFECT CONNECTION OF THERMAL IMAGING OPTICS AND RIFLESCOPES

When hunting for wild boar at night, having a reliable connection between your riflescope and thermal imaging optic crucial for achieving a consistent point of impact. With the Blaser CM and BL adapters, we offer different, perfectly coordinated solutions of Blaser high-precision daylight optics and innovative clip-on mounts.

BLASER CM CLIP-ON MOUNTS

EASY. QUICK. ALWAYS ACCURATE.

Connected in a matter of seconds – even in rough conditions during the hunt. The clip-on mounts from the Blaser CM range ensure that the riflescope and clip-on device merge into a unit with absolute repeat accuracy in just a few simple steps.

The mounts are available in four different sizes and work in perfect synergy with all Blaser riflescopes (exception: driven-hunt riflescopes B1 1–7x28 iC and B2 1–6x24 iC S). The CM adapters are convenient to use with the Blaser flip covers as the clip-on mount is easily attached with the lens flip cover open. This provides 100 % protection against twisting, ensuring the same accurate connection between clip-on device and riflescope every single time. A tension lever on the side of the mount locks everything in place. Convenient: The riflescope is well protected during the drive to the hunting grounds, on the walk to the stand, and during stalking – and ready to use at any time!

• Compatible with the Blaser riflescopes with B1 2.8–20x50 iC, B1 4–20x58 iC and B2 1.7-10x42 iC, B2 2–12x50 iC, B2 2–15x56 iC and B2 3-18x50 iC QDC+
• In combination with the Blaser lens flip cover: 100 % protection against twisting
• Available in the variants CM 48, 56, 62, and 64.5
• Flip cover can be retrofitted at any time
• Fast and easy mounting

Verdrehgesichert (durch Aufnahme am Flip Cover) – Einfache Fixierung mittels Klemmhebel

Anwendungen:

1. Das Zielfernrohr wird ohne Blaser Objektiv Flip Cover, aber mit Blaser CM Vorsatzmontage und mit Vorsatzgerät verwendet – die Abdeckung wird in der Blaser CM Vorsatzmontage belassen.
2. Das Zielfernrohr wird mit Blaser Objektiv Flip Cover, Blaser CM Vorsatzmontage und Vorsatzgerät verwendet – die Abdeckung muss entfernt werden, damit die Blaser CM Vorsatzmontage passgenau aufgeschoben werden kann. 

BLASER BL CLIP-ON MOUNTS

SUPREMELY COMPACT AND PRECISE

Blaser BL clip-on mounts ensure a particularly compact and always accurate connection between riflescope and clip-on optics. They form a perfect union with the Blaser driven-hunt riflescopes B1 1-7x28 iC and B2 1-6x24 iC S, which are designed for use with thermal imaging clip-on optics due to the ideal magnification range for hunting wild boar and the mounting rail that extends to the lens.

When it comes to extremely easy handling and maximum convenience, there is nothing quite like the BL clip-on mounts. The unbeatable advantage: Thanks to the automatic positioning and alignment of the clip-on mount with the inner rail, mounting is easy and always accurate, even in complete darkness. The inner rail also ensures that the clip-on device is 100 % reliably protected against twisting during mounting.

• Compatible with the Blaser driven-hunt riflescopes B1 1-7x28 iC and B2 1-6x24 iC S
• Particularly suitable for hunting wild boar and for hunting from a raised hide at night
• Easy and always accurate mounting in any hunting situation
• Secured against twisting by the inner rail
• Two variants for main tube diameter 34 mm (B1) and 30 mm (B2)
• Each with three different threads to fit different clip-on mounts

Available variants:

• BL 30: M30x1
• BL 43: M43x0.75 for LIEMKE LUCHS–2, LUCHS–1 and LUCHS-25.1
• BL 52: M52x0,75

The Blaser clip-on mounts BL 30 (M30x1 thread) and BL 42 (M43x0.75 thread) fit the LIEMKE thermal imaging clip-on devices LUCHS–2, LUCHS–1, and LUCHS-25.1. It is usually also possible to use thermal imaging clip-on devices from other manufacturers with M30x1, M43x0.75 or M52x0.75 thread.